The Poorman's Staccato - Part 3

After researching and pricing out options for a bead blasting setup—including a case and compressor—I came to the conclusion that, given the cost and limited space in my workshop, it would be more practical to outsource the work.

If I had more space, I likely would’ve invested in a countertop bead blasting cabinet from Harbor Freight, paired with a decent compressor like a Husky 20-gallon unit. But for this project, outsourcing made more sense.

I got in touch with a local bead blasting company, and they were very accommodating with both their service and pricing. They also understood that since this involved a serialized firearm component, I couldn’t leave it with them—especially since they’re not a Federal Firearms Licensee (FFL). Fortunately, the job only took about thirty minutes while I waited.

The end result was stunning—a smooth satin finish that really elevated the look.

Once I got everything home, I reassembled the parts without any issues. The Brat now has a clean, two-tone look that sets it apart and gives it a unique presence.

This picture was edited slightly to edit out my serial number

In the next week or two, I’ll be sending my slide to DSC Gunworks for some custom machining. Here's the planned work:

• Flush Cut Reverse Crowned Barrel
  
  

• DSC Slide Windows - While DSC typically does three window cuts, due to the shorter slide length, this setup will have two window cuts per side, focused towards the front of the slide.

• Top Dimple Pattern - A precision dimpled texture on the top of the slide to reduce glare and add a unique aesthetic touch.

• Dual Barrel Tags:

  • Top Tag: Etched with "Roof Korean"

  • 45-Degree Angle Tag: Etched with an American Flag